Before hitting that “complete order” button, make sure the Tern DuoStand in your cart will fit on your HSD. Check out this info provided by Tern on fitting the earlier DuoStands to the original HSD.
Got a newer HSD? This guide covers the first-generation HSD frames (Gen 1 and Gen 1A) and the first two DuoStand generations. Tern now sells newer HSD generations, and the current stand is the DuoStand Gen 3, which fits the HSD, Quick Haul and Short Haul. If you’re not sure which frame or stand you have, send us your serial number or call 646-736-7716 and we’ll tell you what fits.
1. Identifying Your HSD Frame Generation
Two types of first-generation HSD frames were produced and sold. We refer to them as HSD Gen 1 and HSD Gen 1A. The only difference between these two frame types is the shape of the kickstand mount. Otherwise, the two frame types are completely identical.
Let’s take a look at the kickstand mount for each frame type. It’s located on your HSD’s chainstay, just in front of the rear wheel.

As you can see, the HSD Gen 1 has a flat kickstand mount. On the HSD Gen 1A, the kickstand mount also has vertical “walls.” These little walls provide built-in reinforcement for the kickstand mount.
2. Identifying Your DuoStand Generation
The first two generations of the DuoStand are what this guide covers. We refer to them as DuoStand Gen 1 and DuoStand Gen 2. The DuoStand Gen 2 is an updated version of the Gen 1, and there are some functional differences between the two.
Here’s what the two DuoStand generations look like:
![]() |
![]() |
| DuoStand Gen 1 | DuoStand Gen 2 |
As you can see, the two generations are quite visually distinct. The DuoStand Gen 2 has height-adjustable legs and rubber feet extending out to widen the stand’s support base.
3. Required Parts & Instructions
Now that you’ve figured out which HSD frame type and DuoStand generation you own, here’s what you’ll need to put it all together.
Installing the DuoStand Gen 1 on the HSD Gen 1

ADDITIONAL PARTS
None. All necessary parts are included in your DuoStand package.
Installing the DuoStand Gen 2 on the HSD Gen 1

ADDITIONAL PARTS
DuoStand HSD Kit
Read more information about the DuoStand HSD Kit
Installing the DuoStand Gen 1 on the HSD Gen 1A

ADDITIONAL PARTS
None
All necessary parts are included in your DuoStand package, and you can discard the wing-shaped plate and bushings that come in the package. You don’t need it since your kickstand mount’s built-in walls do the same job.
Installing the DuoStand Gen 2 on the HSD Gen 1A

ADDITIONAL PARTS
None
None. All necessary parts are included in your DuoStand package.
4. Learn More: Video
To get this information via video and learn more about our updates to the DuoStand, check out this video:
We hope this helps! For additional questions, don’t hesitate to give us a call or send us an email.

