Tern GSD
Front wheel — not recommended, uses a cafe lock already. V1 GSD uses Q-LOC and V2 uses Universal fit — threaded 15mm front.
must be paired with a 6mm Hexlox bit
Rear wheel — not recommended, extremely hard to access and because the stock axle is much longer than normal, the Universal fit — threaded 12mm rear has a bad and scary tendency to unthread during use. This is a big safety concern and also is just unnecessary theft protection for a rear end that is already difficult to access by a trained mechanic, let alone a thief.
must be paired with a 6mm Hexlox bit
Saddle — sometimes needs to be paired with a magnetic bolt, depending on what comes from Tern’s factory
must be paired with a 5mm Hexlox bit
Seatpost clamp — must be paired with a magnetic bolt, recessed nut and curved washers — $7.50 for each clamp, $15 total for 2 Tern GSD seatpost clamps to be converted for Hexlox.
must be paired with a 4mm Hexlox bit
Riese & Muller Nevo
Front Wheel — For Suntour fork, 15mm Universal Q-LOC front axle is required
15mm Universal Q-LOC front axle must be paired with a 6mm Hexlox bit
Rear wheel — 3 configs: Rohloff, Vario, Touring
Rohloff must be paired with a Hexlox REAR MTB skewer
REAR MTB Skewer must be paired with a 5mm Hexlox bit
Vario must be paired with 1 or 2 Hexlox Hexnuts with M10 Thread
M10 Hexnut must be paired with a 6mm Hexlox bit
Touring must be paired with a 12mm thru axle, either #LIG604 (presized [and stronger!], 12×1.5×172-174mm) or Universal fit — 12mm rear threaded
M12 rear thru axle must be paired with a 6mm Hexlox bit
Saddle — sometimes needs to be paired with a magnetic bolt, depending on what comes from R&M
Seatpost clamp — may need to be changed out for a bolted seatpost collar, and the bolt changed out for a magnetic bolt
Riese & Muller Homage
Front Wheel — For Suntour fork, 15mm Universal Q-LOC front axle is required
15mm Universal Q-LOC front axle must be paired with a 6mm Hexlox bit
Rear wheel — 3 configs: Rohloff, Vario, Touring
Rohloff must be paired with a Hexlox REAR MTB skewer
REAR MTB Skewer must be paired with a 5mm Hexlox bit
Vario must be paired with 1 or 2 Hexlox Hexnuts with M10 Thread
M10 Hexnut must be paired with a 6mm Hexlox bit
Touring must be paired with a 12mm thru axle, either #LIG604 (presized [and stronger!], 12×1.5×172-174mm) or Universal fit — 12mm rear threaded
M12 rear thru axle must be paired with a 6mm Hexlox bit
Saddle — sometimes needs to be paired with a magnetic bolt, depending on what comes from R&M
Seatpost clamp — may need to be changed out for a bolted seatpost collar, and the bolt changed out for a magnetic bolt
Riese & Muller Supercharger
Front Wheel — For Suntour fork, 15mm Universal Q-LOC front axle is required. For Fox fork, 15mm threaded or pre-sized 15mm Fox Robert Thru axle is required
15mm Universal Q-LOC and 15mm threaded front axles both must be paired with a 6mm Hexlox bit
Rear wheel — 3 configs: Rohloff, Vario, Touring
Rohloff must be paired with a Hexlox REAR MTB skewer
REAR MTB Skewer must be paired with a 5mm Hexlox bit
Vario must be paired with 1 or 2 Hexlox Hexnuts with M10 Thread
M10 Hexnut must be paired with a 6mm Hexlox bit
Touring must be paired with a 12mm thru axle, either #LIG604 (presized [and stronger!], 12×1.5×172-174mm) or Universal fit — 12mm rear threaded
M12 rear thru axle must be paired with a 6mm Hexlox bit
Saddle — sometimes needs to be paired with a magnetic bolt, depending on what comes from R&M
Seatpost clamp — may need to be changed out for a bolted seatpost collar, and the bolt changed out for a magnetic bolt
Riese & Muller Superdelite
Front Wheel — For Suntour fork, 15mm Universal Q-LOC front axle is required. For Fox fork, 15mm threaded or pre-sized 15mm Fox Robert Thru axle is required
15mm Universal Q-LOC and 15mm threaded front axles both must be paired with a 6mm Hexlox bit
Rear wheel — 3 configs: Rohloff, Vario, Touring
Rohloff must be paired with a Hexlox REAR MTB skewer
REAR MTB Skewer must be paired with a 5mm Hexlox bit
Vario must be paired with 1 or 2 Hexlox Hexnuts with M10 Thread
M10 Hexnut must be paired with a 6mm Hexlox bit
Touring must be paired with a 12mm thru axle, either #LIG604 (presized [and stronger!], 12×1.5×172-174mm) or Universal fit — 12mm rear threaded
M12 rear thru axle must be paired with a 6mm Hexlox bit
Saddle — sometimes needs to be paired with a magnetic bolt, depending on what comes from R&M
Seatpost clamp — may need to be changed out for a bolted seatpost collar, and the bolt changed out for a magnetic bolt
Tern HSD
Front wheel — no cafe lock on the front wheel, in contrast to GSD, uses Universal fit — threaded 15mm front.
must be paired with a 6mm Hexlox bit
Rear wheel — not recommended, uses a cafe lock, but easy to install and use for extra security.
S8i uses 3/8″ hexnut
must be paired with a 6mm Hexlox bit
S11 uses M10 hexnut
must be paired with a 6mm Hexlox bit
P9 uses Hexlox REAR MTB skewer
must be paired with a 5mm Hexlox bit
Saddle — sometimes needs to be paired with a magnetic bolt, depending on what comes from Tern’s factory
must be paired with a 5mm Hexlox bit
Seatpost clamp — must be paired with a magnetic bolt, recessed nut and curved washers — $7.50 for each clamp, $15 total for 2 Tern GSD seatpost clamps to be converted for Hexlox.
must be paired with a 4mm Hexlox bit
Load 75 & Load 60
Front wheel — uses Universal fit — threaded 15mm front
must be paired with a 6mm Hexlox bit
Rear wheel — 3 configs: Rohloff, Vario, Touring
Rohloff must be paired with a Hexlox REAR MTB skewer
REAR MTB Skewer must be paired with a 5mm Hexlox bit
Vario must be paired with 1 or 2 Hexlox Hexnuts with M10 Thread
M10 Hexnut must be paired with a 6mm Hexlox bit
Touring must be paired with a 12mm thru axle, either #LIG604 (presized [and stronger!], 12×1.5×172-174mm) or Universal fit — 12mm rear threaded
M12 rear thru axle must be paired with a 6mm Hexlox bit
Saddle — sometimes needs to be paired with a magnetic bolt, depending on what comes from R&M
Seatpost clamp — may need to be changed out for a bolted seatpost collar, and the bolt changed out for a magnetic bolt
Ultimate/Medeo T10/C380
Front wheel — uses Hexlox FRONT MTB skewer
must be paired with a 5mm Hexlox bit
Rear wheel — 2 configs: (T10) derailleur or ( C380) Enviolo
T10 must be paired with a Hexlox REAR MTB skewer
REAR MTB Skewer must be paired with a 5mm Hexlox bit
C380 must be paired with 1 or 2 Hexlox Hexnuts with M10 Thread
M10 Hexnut must be paired with a 6mm Hexlox bit
Saddle — sometimes needs to be paired with a magnetic bolt, depending on what comes from Gazelle
Seatpost clamp — may need to be changed out for a bolted seatpost collar, and the bolt changed out for a magnetic bolt
Ultimate/Medeo T10+/C380+
Front wheel — uses Universal fit — Front 15mm Suntour Q LOC thru axle
must be paired with a 6mm Hexlox bit
Rear wheel — 2 configs: (T10) derailleur or ( C380) Enviolo
T10 must be paired with a Hexlox REAR MTB skewer
REAR MTB Skewer must be paired with a 5mm Hexlox bit
C380 must be paired with 1 or 2 Hexlox Hexnuts with M10 Thread
M10 Hexnut must be paired with a 6mm Hexlox bit
Saddle — sometimes needs to be paired with a magnetic bolt, depending on what comes from Gazelle
Seatpost clamp — may need to be changed out for a bolted seatpost collar, and the bolt changed out for a magnetic bolt
Urban Arrow Family
Front wheel — uses Hexlox FRONT MTB skewer
must be paired with a 5mm Hexlox bit
Rear wheel — uses 1 or 2 Hexnuts with M10 thread
must be paired with a 6mm Hexlox bit
Saddle — sometimes needs to be paired with a magnetic bolt, depending on what comes from Gazelle
Seatpost clamp — may need to be changed out for a bolted seatpost collar, and the bolt changed out for a magnetic bolt